Guides
Choosing and specifying the part
- WashersChoosing a washer for a joint that sees vibrationPlain, conical spring, star or wave: what each one does in a joint that settles, vibrates or heats and cools.
- Star washersDIN 6797 or DIN 6798: which lock washerToothed or serrated, external, internal or countersunk, and how IS 5371 fits in.
- CirclipsCirclip groove design: what the drawing needsGroove diameter, width and edge margin, what limits the load, and what to send.
- StandardsDIN, ISO and IS: which standards are the same partThe equivalents for every standard we make to, and what changes when ISO replaces DIN.
- FinishesMaterials and finishes for salt-spray requirementsPhosphate, black oxide, zinc, zinc flake or stainless, and why hardened parts need care.
- Spring washersWave washer or conical spring washer for preloadLight load over long travel, or heavy load over short travel, and how to specify it.
- RFQWhat to send with an RFQ so we can quote fastThe checklist behind a feasibility note in 2 working days, and what the note tells you.
Reference
Look it up
Request for quotation
Send us the drawing.
We reply with a feasibility note within 2 working days for a part made to a standard, and within 5 working days for a custom part. PDF, DWG and STEP files accepted.
Or email the drawing to inquiry@photoray.co.in.