Guide · Standards

DIN, ISO and IS: which standards are the same part

Drawings name DIN, ISO or Indian Standards, often for the same part. Here is how the standards we make to line up, and what to check when one replaces another.

The standards we make to, part by part

PartISDINISO
Plain washersIS 2016DIN 125ISO 7089
Split pinsIS 549DIN 94ISO 1234
Slotted spring dowel pinsIS 5988DIN 1481ISO 8752
Star washersIS 5371DIN 6797, DIN 6798–
CirclipsIS 3075DIN 471, DIN 472–
E-clipsIS 3075DIN 6799–
Conical spring washers–DIN 6796–
Wave washers–DIN 137, DIN 6904–

When ISO replaced DIN

Germany has replaced several DIN fastener standards with ISO ones: ISO 7089 for DIN 125 plain washers, ISO 1234 for DIN 94 split pins and ISO 8752 for DIN 1481 spring pins. The parts are the same kind and the common sizes are close, but they are not always identical. Some sizes, tolerances and hardness classes differ.

Drawings made years ago still name the DIN number, and that is fine. What matters is that the drawing names one standard, and we make to that one.

Indian Standards

The Indian Standards cover the same families. IS 5371, for example, was drawn up with reference to DIN 6797. Where a drawing names an IS number, we make to the IS standard, not to its DIN cousin.

What to put on the drawing

  • One standard number, with its year if your quality system needs it.
  • The form or type, for example DIN 125 form A or IS 5371 type B.
  • The nominal size, the material grade or hardness class, and the finish.

If you are moving a part from a DIN to an ISO standard and want to know what changes, send both numbers with the RFQ and we will compare them in the feasibility note.

Request for quotation

Send us the drawing.

We reply with a feasibility note within 2 working days for a part made to a standard, and within 5 working days for a custom part. PDF, DWG and STEP files accepted.

Or email the drawing to inquiry@photoray.co.in.