Industries

Wherever a shaft, a bolt or a bearing needs holding

Our washers, circlips, E-clips, pins and shims go into vehicles, farm and construction machines, engines, switchgear, motors, fans and appliances. Our clientele includes Ashok Leyland, Greaves Cotton, JBM Group, Siemens, L&T Switchgear and TAFE, amongst others.

Industries we supply

The same parts, in very different machines

A circlip that holds a gear in a truck gearbox also holds the rotor in a fan motor. If your product has a shaft, a bearing, a bolted joint or an earth connection, we probably make a part for it.

  • Automotive

    Commercial vehicles, cars and two-wheelers

    Brakes, clutches, gearboxes, axles, steering and suspension, for vehicle makers and their Tier-1 and Tier-2 suppliers. This is where we earned our 0 PPM record.

    Circlips · Snap rings · Split pins · Shims · Wave washers · Dowel pins

    Parts by assembly
  • Off-highway

    Tractors and farm equipment

    Transmissions, PTO shafts, hydraulic lift linkages and implement pins. Split pins and circlips that hold up to dust, mud and shock loads.

    Split pins · Circlips · Plain washers · Dowel pins · Shims

    Transmission parts
  • Off-highway

    Construction and earth-moving equipment

    Pivot pins, hydraulic cylinders, swing drives and axles on loaders, excavators and cranes, where heavier sections and thicker stock count.

    Circlips · Snap rings · Split pins · Shims · Custom parts up to 5.0 mm

    Hydraulic parts
  • Power

    Engines, gensets and pumpsets

    Diesel and petrol engines for vehicles, gensets, pumpsets and small machines: dowels that locate housings, circlips on shafts and pins, shims that set clearances.

    Dowel pins · Circlips · Shims · Conical spring washers · Brackets

    Engine parts
  • Electrical

    Switchgear and electrical equipment

    Circuit breakers, contactors, panels and busbar systems. Star washers make the earth connection and conical spring washers keep busbar joints tight as they heat and cool.

    Star washers · Conical spring washers · E-clips · Stamped and wire-formed parts

    Switchgear parts
  • Consumer durables

    Fans, motors, appliances and electronics

    Ceiling, table and exhaust fans, small motors, mixers, washing machines and coolers. Wave washers preload the motor bearings and E-clips and circlips hold the rotor shaft, in volumes our 15 presses are built for.

    Wave washers · E-clips · Circlips · Star washers · Shims

    Motor and fan parts
  • Industrial

    Pumps, hydraulics and machinery

    Pumps, compressors, gearboxes, machine tools and textile and packaging machines. Circlips and snap rings retain bearings and seals, and shims set the fits.

    Circlips · Snap rings · Shims · Wave washers · Dowel pins

    Bearing housing parts
  • Your industry

    Not on this list?

    Send the drawing. If it is stamped, ground or wire-formed from 0.1 to 5.0 mm stock, we will tell you within 2 working days whether we can make it.

    Submit an RFQ

What every customer gets

Automotive discipline, whatever you make

We run every order to the quality system our automotive customers hold us to, so a fan maker gets the same parts and the same paperwork as a truck maker.

  • Delivered Cpk of 1.33 or higher on the special and important characteristics of each drawing.
  • 0 PPM across all supplies to all our customers over the last five years.
  • 98% on-time delivery, measured against the date the customer requires.
  • ISO 9001:2015 certified by Bureau Veritas. IATF 16949 implementation underway. PPAP at level 5.
  • Standard sizes to IS, DIN and ISO standards, and customised sizes to your drawing.
  • About 50,000 pcs/day of free capacity today, so a new part does not wait for a slot.

Request for quotation

Send us the drawing.

We reply with a feasibility note within 2 working days for a part made to a standard, and within 5 working days for a custom part. PDF, DWG and STEP files accepted.

Or email the drawing to inquiry@photoray.co.in.