Glossary

Stamping and quality terms

The words on our drawings, quotes and quality documents, defined in a sentence each.

APQP
Advanced Product Quality Planning: the automotive industry's structured way to plan a new part, from design through to the start of production.
Blanking
Cutting the outline of a flat part out of strip or sheet in a press.
Burr
The small raised edge left on a stamped part where the metal sheared.
Circlip
A spring steel ring that sits in a groove on a shaft (external) or in a bore (internal) to hold a part in place along the axis.
Compound die
A die that does more than one cutting operation, such as piercing the hole and blanking the outline, in a single press stroke.
Cpk
Process capability index: the distance from the process mean to the nearest tolerance limit, divided by three standard deviations. A Cpk of 1.33 means the nearest limit is four standard deviations from the mean.
Dowel pin
A precision pin that locates two parts against each other, so they assemble in the same position every time.
E-clip
A retaining ring shaped like the letter E, pushed onto a grooved shaft from the side.
Feeder
A machine that advances coil strip into the press by a set length on every stroke.
Flatness
How far a surface departs from a perfect plane, given as the gap between two parallel planes that just contain it.
Parallelism
How far one face departs from being parallel to a reference face.
PPAP
Production Part Approval Process: the documents and sample parts a supplier submits to show that a part and its process meet the customer's requirements.
PPM
Parts per million: the number of defective parts per million delivered.
Press force
The largest force a press can apply, given in tonnes (T).
Shim
A thin plate or ring that sets a gap or a preload in an assembly by its thickness.
SOP
Start of production: the date series production of a vehicle or assembly begins.
Split pin
A pin of folded half-round wire, passed through a hole and bent open to lock a nut or a pin in place.
Spring steel
A high-carbon or alloy steel, hardened and tempered so it returns to shape after it is deflected.
Stroke
One down-and-up cycle of the press ram. SPM is strokes per minute.
Wave washer
A washer with waves formed around it, giving an axial spring load in a short height.

Request for quotation

Send us the drawing.

We reply with a feasibility note within 2 working days for a part made to a standard, and within 5 working days for a custom part. PDF, DWG and STEP files accepted.

Or email the drawing to inquiry@photoray.co.in.