DIN 6799 · IS 3075
E-clips
E-clips push onto a grooved shaft from the side, so they fit where there is no room to slide a circlip over the shaft end. We make every size in DIN 6799 and IS 3075 from hardened spring steel, and develop any other size to your drawing.
- Standard sizes
- DIN 6799, IS 3075
- Custom sizes
- Any size, to your drawing
- Thickness
- 0.1 to 5.0 mm
- Finish
- Zinc, phosphated or blackened
Sizes
Standard or to your drawing
Standard sizes
Every size in DIN 6799 and IS 3075
Custom sizes
Any size, to your drawing
We develop any size, thickness or form your drawing needs, from 0.1 to 5.0 mm stock. If it needs new tooling, we make the die in our own tool room and give you the timeline once we have studied your drawing.
Materials and finishes
Materials
Mild steelCarbon spring steel EN 42J (C80)Carbon spring steel EN 9 (C55)Stainless steel SS 304Stainless steel SS 316
Finishes
Zinc plated, yellow trivalent passivationZinc plated, green trivalent passivationPhosphatedBlackened
Other grades and finishes to your drawing. Name them in the RFQ.
How we check it
| Characteristic | Method |
|---|---|
| Thickness s | Micrometer |
| Opening width a | Vernier caliper |
| Hardness | Hardness tester |
| Visual: burrs, cracks | Visual inspection |
Inspection frequency follows the control plan agreed for your part. Delivered Cpk of 1.33 or higher on the special and important characteristics marked on your drawing.
By assembly
Used in
The assemblies our e-clips go into. Pick one to see the other parts we make for it.
Questions
What engineers ask us about e-clips
Which standard do you make E-clips to?
Every groove size in DIN 6799 and IS 3075. Other sizes we develop to your drawing.
Request for quotation
Send us the drawing.
We reply with a feasibility note within 2 working days for a part made to a standard, and within 5 working days for a custom part. PDF, DWG and STEP files accepted.
Or email the drawing to inquiry@photoray.co.in.


