DIN 137 · DIN 6904

Wave washers

Wave washers have waves formed around the ring, so they give an axial spring load in very little height, for example to take up end play or preload a bearing. We make both types in DIN 137, Type A (curved) and Type B (wave), every size in DIN 6904, and any other size, wave count or load to your drawing.

Standard sizes
DIN 137, DIN 6904
Types
Type A curved, Type B wave
Custom sizes
Any size, to your drawing
Finish
Zinc, phosphated or blackened
Illustration of a wave washer, seen at an angle to show the waves around the ring.

Sizes

Standard or to your drawing

Custom sizes

Any size, to your drawing

We develop any size, thickness or form your drawing needs, from 0.1 to 5.0 mm stock. If it needs new tooling, we make the die in our own tool room and give you the timeline once we have studied your drawing.

Materials and finishes

Materials

Mild steelCarbon spring steel EN 42J (C80)Carbon spring steel EN 9 (C55)Stainless steel SS 304Stainless steel SS 316

Finishes

Zinc plated, yellow trivalent passivationZinc plated, green trivalent passivationPhosphatedBlackened

Other grades and finishes to your drawing. Name them in the RFQ.

How we check it

CharacteristicMethod
Thickness sMicrometer
Free height hHeight gauge and dial gauge
Inside Ø d1Vernier caliper and profile projector
HardnessHardness tester

Inspection frequency follows the control plan agreed for your part. Delivered Cpk of 1.33 or higher on the special and important characteristics marked on your drawing.

By assembly

Used in

The assemblies our wave washers go into. Pick one to see the other parts we make for it.

Questions

What engineers ask us about wave washers

Which standards do you make wave washers to?

Every size in DIN 137 and DIN 6904. Other sizes and wave counts we develop to your drawing.

What is the difference between Type A and Type B?

Type A is a curved washer, bent once across its face. Type B is a wave washer, with several waves around the ring, which spreads the load more evenly around the bolt or bearing. We make both.

Can you make wave washers to a load we specify?

Send the working height and the load you need there with the drawing, and we will confirm it in the feasibility note.

Request for quotation

Send us the drawing.

We reply with a feasibility note within 2 working days for a part made to a standard, and within 5 working days for a custom part. PDF, DWG and STEP files accepted.

Or email the drawing to inquiry@photoray.co.in.