DIN 6797 · DIN 6798 · IS 5371
Star washers
Star washers have teeth that bite into the bolt head or nut and the surface under it, to resist loosening under vibration. We make every size in DIN 6797, DIN 6798 and IS 5371, with external or internal teeth, and develop any other size to your drawing.
- Standard sizes
- DIN 6797, DIN 6798, IS 5371
- Custom sizes
- Any size, to your drawing
- Forms
- External or internal teeth
- Finish
- Zinc, phosphated or blackened
Sizes
Standard or to your drawing
Standard sizes
Every size in DIN 6797, DIN 6798 and IS 5371
Custom sizes
Any size, to your drawing
We develop any size, thickness or form your drawing needs, from 0.1 to 5.0 mm stock. If it needs new tooling, we make the die in our own tool room and give you the timeline once we have studied your drawing.
Materials and finishes
Materials
Mild steelCarbon spring steel EN 42J (C80)Carbon spring steel EN 9 (C55)Stainless steel SS 304Stainless steel SS 316
Finishes
Zinc plated, yellow trivalent passivationZinc plated, green trivalent passivationPhosphatedBlackened
Other grades and finishes to your drawing. Name them in the RFQ.
How we check it
| Characteristic | Method |
|---|---|
| Thickness s | Micrometer |
| Inside Ø d1 | Vernier caliper and profile projector |
| Tooth form | Profile projector and bevel gauge |
| Hardness | Hardness tester |
Inspection frequency follows the control plan agreed for your part. Delivered Cpk of 1.33 or higher on the special and important characteristics marked on your drawing.
By assembly
Used in
The assemblies our star washers go into. Pick one to see the other parts we make for it.
Questions
What engineers ask us about star washers
What is the difference between DIN 6797 and DIN 6798?
DIN 6797 covers toothed lock washers, with fewer and wider teeth. DIN 6798 covers serrated lock washers, with more and finer teeth. Both come with external teeth (form A) or internal teeth (form J).
Which sizes do you make?
Every size in DIN 6797, DIN 6798 and IS 5371. Other sizes we develop to your drawing.
Request for quotation
Send us the drawing.
We reply with a feasibility note within 2 working days for a part made to a standard, and within 5 working days for a custom part. PDF, DWG and STEP files accepted.
Or email the drawing to inquiry@photoray.co.in.

