DIN 6796

Conical spring washers

Conical spring washers are dished, so they act as a stiff spring under the nut and help a bolted joint keep its clamp load when it settles. We make every size in DIN 6796 from hardened spring steel, and develop any other size or load to your drawing.

Standard sizes
DIN 6796
Custom sizes
Any size, to your drawing
Thickness
0.1 to 5.0 mm
Finish
Zinc, phosphated or blackened
Illustration of a conical spring washer, seen at an angle to show its dished form.

Sizes

Standard or to your drawing

Standard sizes

Every size in DIN 6796

Custom sizes

Any size, to your drawing

We develop any size, thickness or form your drawing needs, from 0.1 to 5.0 mm stock. If it needs new tooling, we make the die in our own tool room and give you the timeline once we have studied your drawing.

Materials and finishes

Materials

Mild steelCarbon spring steel EN 42J (C80)Carbon spring steel EN 9 (C55)Stainless steel SS 304Stainless steel SS 316

Finishes

Zinc plated, yellow trivalent passivationZinc plated, green trivalent passivationPhosphatedBlackened

Other grades and finishes to your drawing. Name them in the RFQ.

How we check it

CharacteristicMethod
Thickness sMicrometer
Free height hHeight gauge and dial gauge
Inside Ø d1Vernier caliper and profile projector
HardnessHardness tester

Inspection frequency follows the control plan agreed for your part. Delivered Cpk of 1.33 or higher on the special and important characteristics marked on your drawing.

By assembly

Used in

The assemblies our conical spring washers go into. Pick one to see the other parts we make for it.

Questions

What engineers ask us about conical spring washers

Which standard do you make conical spring washers to?

Every size in DIN 6796. Other sizes, and washers to a load you specify at working height, we develop to your drawing.

What material do you use?

Carbon spring steel EN 42J (C80) or EN 9 (C55), hardened and tempered, or stainless steel SS 304 or SS 316; mild steel where the drawing allows it. Other grades to your drawing.

Request for quotation

Send us the drawing.

We reply with a feasibility note within 2 working days for a part made to a standard, and within 5 working days for a custom part. PDF, DWG and STEP files accepted.

Or email the drawing to inquiry@photoray.co.in.