DIN 94 · ISO 1234 · IS 549
Split pins
Split pins lock a castle nut or a clevis pin in place: the legs pass through a cross hole and are bent back. We bend them in-house in every size in DIN 94, ISO 1234 and IS 549, and in non-standard diameters and lengths to your drawing.
- Standard sizes
- DIN 94, ISO 1234, IS 549
- Custom sizes
- Any diameter or length
- Made from
- Mild steel, spring steel or stainless wire
- Finish
- Zinc, phosphated or blackened
Sizes
Standard or to your drawing
Standard sizes
Every size in DIN 94, ISO 1234 and IS 549
Custom sizes
Any size, to your drawing
We develop any size, thickness or form your drawing needs, from 0.1 to 5.0 mm stock. If it needs new tooling, we make the die in our own tool room and give you the timeline once we have studied your drawing.
Materials and finishes
Materials
Mild steelCarbon spring steel EN 42J (C80)Carbon spring steel EN 9 (C55)Stainless steel SS 304Stainless steel SS 316
Finishes
Zinc plated, yellow trivalent passivationZinc plated, green trivalent passivationPhosphatedBlackened
Other grades and finishes to your drawing. Name them in the RFQ.
How we check it
| Characteristic | Method |
|---|---|
| Shank Ø d | Vernier caliper and profile projector |
| Length l | Vernier caliper |
| Eye form | Profile projector and bevel gauge |
| Leg length difference | Vernier caliper |
Inspection frequency follows the control plan agreed for your part. Delivered Cpk of 1.33 or higher on the special and important characteristics marked on your drawing.
By assembly
Used in
The assemblies our split pins go into. Pick one to see the other parts we make for it.
Questions
What engineers ask us about split pins
What is the difference between DIN 94 and ISO 1234?
ISO 1234 is the international standard for split pins and replaced DIN 94, but many drawings still name DIN 94 for the same part. We make to both, and to IS 549.
Do you make split pins to non-standard lengths?
Yes. Any length or diameter outside the standard, to your drawing.
Request for quotation
Send us the drawing.
We reply with a feasibility note within 2 working days for a part made to a standard, and within 5 working days for a custom part. PDF, DWG and STEP files accepted.
Or email the drawing to inquiry@photoray.co.in.


